Summer Starts Here - Save up to 70%
Husky Liners Tailgate Installation - 2007 Chevrolet Silverado New Body- Video
Today on our 2007 Chevrolet Silverado, new body style, we'll be having a look at the Husky Liners Premium 5th Wheel Louvered Tailgate with Locking Handles, part number HL15240. It's a nice streamlined, aerodynamic look that follows all of the body lines of our truck bed nicely. It is constructed of a nice aluminum finish that won't rust or corrode over time. We have our nice cutout here for when we're towing our 5th wheel or a goose-neck trailer, we don't have to worry about having the tailgate down in order to doing tight maneuvering or backing up to it to uncouple or couple. Now this tailgate is lockable to help prevent tailgate theft. To do that, just insert your key, turn it counterclockwise and now your tailgate's locked. To unlock it, just insert the key again, go clockwise, and then you have access to your bed again. more
1/30/2017 11:47:22 AM
Stromberg Carlson Tailgate Installation - 2007 Chevrolet Silverado New Body- Video
Today, on this 2007 Chevrolet Silverado new body extended cab, we're going to install part number VGM-07-4000. This is a Stromberg Carlson 4000 Series 5th wheel louvered tailgate. The first thing we need to do is go ahead and remove our tailgate. We'll go ahead and take some tension off the cables and we'll go ahead and remove the cables. Typically, you pick up a corner here and then we can pull it out away from the truck. Okay, now installing your new tailgate pretty much reverses the order of removing the original tailgate. Now, the tailgate does come with some special bushings that will fit on the end where it slides in. However, in this truck, we didn't have to use any of them. more
4/7/2014 2:55:19 PM
Stromberg Carlson Tailgate Installation - 2007 Chevrolet Silverado- Video
Today on this 2007 Chevrolet Silverado 2500 Series new body style; were going to do a test fit for part number, VGM-07-100. Were going to start off with our tailgate already removed and well go ahead and take the new tailgate and put it into place. First off, we are going to take the bushing that comings with the tailgate, install it on the pin on the driver side. Then well take the tailgate and slide it over that bushing and then we can go ahead and install the tailgate just like any other tailgate. Well go ahead and take the latch and well pull it in a little bit on each side and then push the tailgate into place until it snaps in. Inaudible 00:00:40 like your tailgate matches the contour of the bed by the taillight. more
2/1/2013 1:28:29 PM
Filter Videos
Filter Videos
